Difference between revisions of "MD Mutation485"

From Bioinformatikpedia
(internal RMSD)
(solvent accessible surface area)
 
(One intermediate revision by the same user not shown)
Line 27: Line 27:
 
| -
 
| -
 
|-
 
|-
  +
|Coordinates
|Coords
 
 
|2001
 
|2001
 
|5
 
|5
Line 45: Line 45:
 
|}
 
|}
   
The simulation finished on node 0 Thu Sep 15 19:12:47 2011.
+
The simulation finished on node 0 Thu September 15 19:12:47 2011.
   
 
{| border="1" style="text-align:center; border-spacing:0;"
 
{| border="1" style="text-align:center; border-spacing:0;"
Line 62: Line 62:
 
|}
 
|}
   
The complete simulation needs 6 hours and 12 minutes to finishing.
+
The complete simulation needs 6 hours and 12 minutes runtime.
   
 
{| border="1" style="text-align:center; border-spacing:0;"
 
{| border="1" style="text-align:center; border-spacing:0;"
Line 79: Line 79:
 
|}
 
|}
   
As you can see in the table above, it takes about 2/3 hour to simulate 1 ns of the system. So therefore, it would be possible to simulate about __ns in one complete day calculation time.
+
As you can see in the table above, it takes about 2/3 hour to simulate 1 nano second (ns) of the system. So therefore, it would be possible to simulate about 37 ns in one complete day calculation time.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
<br><br>
 
<br><br>
   
=== Visualize in pymol ===
+
=== Visualize in PyMol ===
   
First of all, we visualized the simulation with with ngmx, because it draws bonds based on the topology file. ngmx gave the user the possibility to choose different parameters. Therefore, we decided to visualize the system with following parameters:
+
First of all, we visualized the simulation with ngmx, because it draws bonds based on the topology file. ngmx gave the user the possibility to choose different parameters. Therefore, we decided to visualize the system with following parameters:
   
 
{| border="1" style="text-align:center; border-spacing:0;"
 
{| border="1" style="text-align:center; border-spacing:0;"
Line 111: Line 111:
 
Figure 1 shows the visualization with ngmx:
 
Figure 1 shows the visualization with ngmx:
   
[[Image:mut485_ngmx.png|thumb|center|Figure 1: Visualisation of the MD simulation for Mutation 436 with ngmx]]
+
[[Image:mut485_ngmx.png|thumb|center|Figure 1: Visualization of the MD simulation for mutation 436 with ngmx]]
   
Furthermore, we also want to visualise the structure with pymol, which can be seen on Figure 2.
+
Furthermore, we also want to visualize the structure with PyMol, which can be seen on Figure 2.
   
[[Image:mut485.png|thumb|center|Figure 2: Visualisation of the MD simulation for mutation 485 with pymol]]
+
[[Image:mut485.png|thumb|center|Figure 2: Visualization of the MD simulation for mutation 485 with PyMol]]
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 122: Line 122:
 
=== Create a movie ===
 
=== Create a movie ===
   
Next, we want to visualize the protein with pymol. Therefore, we extracted 1000 frames from the
+
Next, we want to visualize the protein with PyMol. Therefore, we extracted 1000 frames from the
trajectory, leaving out the water and jump over the boundaries to make continouse trajectories.
+
trajectory, leaving out the water and jump over the boundaries to make continuous trajectories.
   
The program asks for the a group as output. We only want to see the protein, therefore we decided to choose group 1.
+
The program asks for a group as output. We only want to see the protein, therefore we decided to choose group 1.
   
 
Here you can see the movie in stick line and cartoon modus.
 
Here you can see the movie in stick line and cartoon modus.
Line 168: Line 168:
 
[[Image:mut485_md_pressure.png|thumb|center|Figure 5: Plot of the pressure distribution of the MD system.]]
 
[[Image:mut485_md_pressure.png|thumb|center|Figure 5: Plot of the pressure distribution of the MD system.]]
   
As you can see in Figure 5, the pressure fluctuates in the system around 0 and the amplitude does mostly not exceed 100. Contrary,there are some outlier which reach values of almost 250 and -250 bar. In this cases we are not sure, if a protein works under such a high pressure.
+
As you can see in Figure 5, the pressure fluctuates in the system around 0 and the amplitude does mostly not exceed 100. Contrary,there are some outliers which reach values of almost 250 and -250 bar. In this cases we are not sure, if a protein works under such a high pressure.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 199: Line 199:
 
[[Image:mut485_md_temp.png|thumb|center|Figure 6: Plot of the temperature distribution of the MD system.]]
 
[[Image:mut485_md_temp.png|thumb|center|Figure 6: Plot of the temperature distribution of the MD system.]]
   
Figure 6 displays the distribution of the temperature in the current MD system. In this case the temperature fluctuates around 298K. The maximal occuring amplitude between the average and the outlier temperature is only about 4 K which is not much. But we have to keep in mind, that only some degree difference can affect huge functional loss of a protein. 298 K corresponds to 25°C, which is relatively low for human protein activity, because the highest activity is normally reached at body temperature which is about 36°C.
+
Figure 6 displays the distribution of the temperature in the current MD system. In this case the temperature fluctuates around 298K. The maximal occurring amplitude between the average and the outliers temperature is only about 4 K which is not much. But we have to keep in mind, that only some degree difference can affect huge functional loss of a protein. 298 K corresponds to 25°C, which is relatively low for human protein activity, because the highest activity is normally reached at body temperature which is about 36°C.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 231: Line 231:
 
[[Image:mut485_md_potential.png|thumb|center|Figure 7: Plot of the potential energy distribution of the MD system.]]
 
[[Image:mut485_md_potential.png|thumb|center|Figure 7: Plot of the potential energy distribution of the MD system.]]
   
Figure 7 displays the potential engery of the system which is between -1.28513e+06 and -1.27769e+06. This is a relativly low energy. Therefore, this probably means that the protein is stable. Furthermore, we can suggest, that the protein with such a low energy is able to function and is stable. Therefore, our simulation is probably true. Otherwise, if the energy of the simulated system would be too high, we can not trust the results, because the protein is too instable to work.
+
Figure 7 displays the potential energy of the system which is between -1.28513e+06 and -1.27769e+06. This is a relatively low energy. Therefore, this probably means that the protein is stable. Furthermore, we can suggest, that the protein with such a low energy is stable and able to function. Therefore, our simulation is probably true. Otherwise, if the energy of the simulated system would be too high, we can not trust the results, because the protein is too instable to work.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 289: Line 289:
 
|}
 
|}
   
Figure 9 displays the minimum distance between periodic boundary cells at different time steps. I can be seen that there are huge differences between the distances at different times. The highest distance is 4.217 nm, whereas the smallest distance is only 1.772 nm. This means that there are some states during the simulation in which the interacting atoms are close together. Contrary there are some states in which the atoms who interact are far away. Because of the huge bandwidth of minimum distance we can conclude, that the protein is flexible.
+
Figure 9 displays the minimum distance between periodic boundary cells at different time steps. It can be seen that there are huge differences between the distances at different times. The highest distance is 4.217 nm, whereas the smallest distance is only 1.772 nm. This means that there are some states during the simulation in which the interacting atoms are close together. Contrary, there are some states in which the atoms who interact are far away. Because of the huge bandwidth of minimum distance we can conclude, that the protein is flexible.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 300: Line 300:
 
First of all, we calculate the RMSF for the whole protein.
 
First of all, we calculate the RMSF for the whole protein.
   
The analysis produce two different pdb files, one file with the average structure of the protein and one file with high B-Factor values, which means that the high flexbile regions of the protein are not in accordance with the original PDB file.
+
The analysis produce two different pdb files, one file with the average structure of the protein and one file with high B-Factor values, which means that the high flexible regions of the protein are not in accordance with the original PDB file.
   
To compare the structure we align them with Pymol with the original structure.
+
To compare the structure we align them with PyMol to the original structure.
   
 
{| border="1" style="text-align:center; border-spacing:0;"
 
{| border="1" style="text-align:center; border-spacing:0;"
Line 329: Line 329:
 
|}
 
|}
   
The RMSD as well as the structure alignement visualization indicates which structures are similar. In this case, the small RMSD at 0.349 as well as the structure alignment where the structures mostly agree indicates that the high B-factors agrees mostly with the original structure (Figure 11 and 14). The alignment of the original structure and the avarage structure delivers a higher disagreement (Figure 10 and Figure 13). There, the RMSD with 1.519 is much higher and the structure alignment is not extremly worse than the other one.
+
The RMSD as well as the structure alignment visualization indicates which structures are similar. In this case, the small RMSD at 0.349 as well as the structure alignment where the structures mostly agree indicates that the high B-factors agrees mostly with the original structure (Figure 11 and 14). The alignment of the original structure and the average structure delivers a higher disagreement (Figure 10 and Figure 13). There, the RMSD with 1.519 is much higher and the structure alignment is not extremely worse than the other one.
 
The regions with high B-Factors are usually very flexible. This means that the downloaded PDB structure is probably in another state, because of its flexible regions.
 
The regions with high B-Factors are usually very flexible. This means that the downloaded PDB structure is probably in another state, because of its flexible regions.
The low RMSD and the agreeing structure alignment of the gigh B-factor structure and the original one displays that the qualitiy of
+
The low RMSD and the agreeing structure alignment of the high B-factor structure and the original one displays that the quality of
 
predicted structure is quite good.
 
predicted structure is quite good.
   
Line 338: Line 338:
 
[[Image:mut485_rmsf.png|thumb|center|Figure 16: Plot of the RMSF values over the whole protein.]]
 
[[Image:mut485_rmsf.png|thumb|center|Figure 16: Plot of the RMSF values over the whole protein.]]
   
There are two regions with very high RMSF values. The first one is at position 150 (Figure 17), and the other one is at position 350 (Figure 18). The structure alignment of the average structure and the original one show that the most regions match with some exceptions. Therefore, we want to analysis, if these bad-machting regions are the regions with very high B-factor values. The following picture show the two regions around position 150 and 350 which have an arised RMSF.
+
There are two regions with very high RMSF values. The first one is at position 150 (Figure 17), and the second one is at position 350 (Figure 18). The structure alignment of the average structure and the original one shows that the most regions match with some exceptions. Therefore, we want to analysis, if these bad-matching regions are the regions with very high B-factor values. The following picture show the two regions around position 150 and 350 which have an arose RMSF.
   
 
{|
 
{|
Line 345: Line 345:
 
|}
 
|}
   
Furthermore, we visualized the B-factors with the Pymol selection B-factor method at this two regions. We calculated the B-factors for the blue protein (Figure 19 and Figure 20). If you see red, this part of the protein is very flexible. The brighter the color, the higher is the flexibility of this residue.
+
Furthermore, we visualized the B-factors with the PyMol selection B-factor method at these two regions. We calculated the B-factors for the blue protein (Figure 19 and Figure 20). If you see red, this part of the protein is very flexible. The brighter the color, the higher is the flexibility of this residue.
   
 
{|
 
{|
Line 352: Line 352:
 
|}
 
|}
   
The first picture displays the alignment around region 150. Here, we can see that the loop is colored in yellow and red. This bright colors shows that the B-factor at this position is very high which indicates a higher flexibility. Contrary, the second picture for the region around residue 350 show only a small part in yellow and some parts in tourqouis whereas the rest is colored in dark blue. Furthermore, the second peak is about 0.35 which does not stand for a high flexibility. All in all, this detailed views assume that thers is only one region in the protein with a high flexibility.
+
The first picture displays the alignment around region 150. Here, we can see that the loop is colored in yellow and red. This bright colors show that the B-factor at this position is very high which indicates a higher flexibility. Contrary, the second picture for the region around residue 350 show only a small part in yellow and some parts in turquoise whereas the rest is colored in dark blue. Furthermore, the second peak is about 0.35 which does not stand for a high flexibility. All in all, this detailed views assume that there is only one region in the protein with a high flexibility.
   
As you can see in the pictures above, especially in the first picture, which is the part with the highest peak in the plot, the structures have a very different position and the alignment in this part of the protein is very bad, although the rest of the alignment is quite good. That is also the reason for the relatively high RMSD which is caused by different position of the flexible parts of the protein.
+
As you can see at the pictures above, especially at the first picture, which is the part with the highest peak in the plot, the structures have a very different position and the alignment in this part of the protein is very bad, although the rest of the alignment is quite good. That is also the reason for the relatively high RMSD which is caused by different position of the flexible parts of the protein.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 361: Line 361:
 
==== C-alpha ====
 
==== C-alpha ====
   
Now we repeat the analysis done for the protein for the C-alpha atoms of the protein. Therefore, we followed the same steps as in the section above.
+
Now we repeat the analysis, done for the protein, for the C-alpha atoms of the protein. Therefore, we followed the same steps as in the section above.
   
To compare the structure we align them with pymol with the original structure.
+
To compare the structure we align them with PyMol with the original structure.
   
 
{| border="1" style="text-align:center; border-spacing:0;"
 
{| border="1" style="text-align:center; border-spacing:0;"
Line 396: Line 396:
 
[[Image:mut485_rmsf_calpha.png|thumb|center|Figure 27: Distribution of the b-factor values by only regarding the backbone of the protein.]]
 
[[Image:mut485_rmsf_calpha.png|thumb|center|Figure 27: Distribution of the b-factor values by only regarding the backbone of the protein.]]
   
In this case, there is only one high peak at position 150 (Figure 27). Having a closer look at the protein it can be seen that the position of the beta sheets differ extremly between the two models.
+
In this case, there is only one high peak at position 150 (Figure 27). Having a closer look at the protein it can be seen that the position of the beta sheets differ extremely between the two models.
 
The other peak at position 350 could not be found in the plot. Looking at the pictures above, we can see that the backbones of the two different models not differ extremely. This means that the position of the residues differ a lot, which is not important for us, because we do not regard side chains.
 
The other peak at position 350 could not be found in the plot. Looking at the pictures above, we can see that the backbones of the two different models not differ extremely. This means that the position of the residues differ a lot, which is not important for us, because we do not regard side chains.
   
 
=== Radius of gyration ===
 
=== Radius of gyration ===
   
Next, we want to analyse the Radius of gyration. Therefore we use g_gyrate and use only the protein for the calculation.
+
Next, we want to analyze the Radius of gyration. Therefore we use g_gyrate and use only the protein for the calculation.
   
 
{|
 
{|
Line 435: Line 435:
 
|}
 
|}
   
Figure 28 shows the radius of gyration over the simulation time. The Radius of gyration is the RMS distance from the outer parts of the protein to the protein center or gyration axis. The plot displays that the average radius is about 2.42 with some fluctuation. This indicates that the protein is flexible. Furthermore, the fluctuation is a periodic curve which shows the loss and the gain of space the protein needs. This suggest that the protein pulsates.
+
Figure 28 shows the radius of gyration over the simulation time. The radius of gyration is the RMS distance from the outer parts of the protein to the protein center or gyration axis. The plot displays that the average radius is about 2.42 with some fluctuation. This indicates that the protein is flexible. Furthermore, the fluctuation is a periodic curve which shows the loss and the gain of space the protein needs. This suggest that the protein pulsates.
   
 
If we have a further look at the radius of the different axis (Figure 29), we can see, that the radius of the x coordinates is
 
If we have a further look at the radius of the different axis (Figure 29), we can see, that the radius of the x coordinates is
Line 443: Line 443:
 
<br><br>
 
<br><br>
   
=== solvent accesible surface area ===
+
=== solvent accessible surface area ===
   
Next, we analysed the solvent accesible surfare area of the protein, which is the area of the protein which has contacts with the surronding environment, mainly water.
+
Next, we analyzed the solvent accessible surface area of the protein, which is the area of the protein which has contacts with the surrounding environment, mainly water.
   
First of all, we have a look at the solvent accesibility of each residue, which can be seen on Figure 27. Furthermore, we regard at the solvent accesibility area of each residue in the protein with standard deviation (Figure 28).
+
First of all, we have a look at the solvent accessibility of each residue, which can be seen on Figure 27. Furthermore, we regard at the solvent accessibility area of each residue in the protein with standard deviation (Figure 28).
   
 
{|
 
{|
|[[Image:mut485_md_solv_acc_residue2.png|thumb|center|Figure 30: Solvent accesibility area of each residue in the protein]]
+
|[[Image:mut485_md_solv_acc_residue2.png|thumb|center|Figure 30: Solvent accessibility area of each residue in the protein]]
|[[Image:mut485_md_solv_acc_residue.png|thumb|center|Figure 31: Solvent accesibility area of each residue in the protein with standard deviation]]
+
|[[Image:mut485_md_solv_acc_residue.png|thumb|center|Figure 31: Solvent accessibility area of each residue in the protein with standard deviation]]
 
|}
 
|}
   
The following table list the average, minimum and maximum values of the Solvent accessibility for each residue in the protein. The residues at the beginning and at the end of the simulation which have a value of 0 are ignored.
+
The following table list the average, minimum and maximum values of the solvent accessibility for each residue in the protein. The residues at the beginning and at the end of the simulation which have a value of 0 are ignored.
   
 
{| border="1" style="text-align:center; border-spacing:0;"
 
{| border="1" style="text-align:center; border-spacing:0;"
Line 468: Line 468:
 
|}
 
|}
   
The average area per residue during the trajectory is between 0 and 2nm², as can be seen in Figure 30. Most of the residues have an area about 0.5nm². From this it follows that there are mainly sparse moving residues during the complete simulation with some exceptions where the residues are very flexible. In Figure 31, you can see additional the standard deviation, which is very low and which indicates that there are no big outliers in there. This means that there is no big deviation from the average area and that the residues behave in the same way during the trajectory.
+
The average area per residue during the trajectory is between 0 and 2nm², as can be seen in Figure 30. Most of the residues have an area about 0.5nm². From this it follows that there are mainly sparse moving residues during the complete simulation with some exceptions where the residues are very flexible. In Figure 31, you can additionally see the standard deviation, which is very low and which indicates that there are no big outliers in there. This means that there is no big deviation from the average area so the residues behave in the same way during the trajectory.
   
Besides, we can analysis the position of the residues within the protein based on the solvent accesibility. First, we can see in the Figure 30 that the first 100 and the last 100 residues have an average solvent accessibility of 0 which means that these residues are always completely in the interior of the protein. Most of the residues have a solvent accessibility about 0.5nm², and there are only some outlier with an accessibility of more than 1.5nm². This means that there are some residues which are almost always on the surface, a lot of residues which are partly or temporarly on the surface and a lot of residues which are never on the surface.
+
Besides, we can analyze the position of the residues within the protein based on the solvent accessibility. First, we can see in Figure 30 that the first 100 and the last 100 residues have an average solvent accessibility of 0 which means that these residues are always completely in the interior of the protein. Most of the residues have a solvent accessibility about 0.5nm², and there are only some outliers with an accessibility of more than 1.5nm². This means that there are some residues which are almost always on the surface, a lot of residues which are partly or temporarily on the surface and a lot of residues which are never on the surface.
Looking at Figure 31, we can see that the standard deviation is relatvely low. This means that there are no system states in which any residues with low or no solvent accessibility get complete accessible to the surface. If the standard deviation would be very high, it would indicate that there are some very unusual states in the simulation which is not the case in our simulation.
+
Looking at Figure 31, we can see that the standard deviation is relatively low. This means that there are no system states in which any residues with low or no solvent accessibility get complete accessible to the surface. If the standard deviation would be very high, it would indicate that there are some very unusual states in the simulation which is not the case in our simulation.
   
Furthermore, it is possible to look at the solvent accesibility of each atom of the complete protein, which can be seen in Figure 32 and Figure 33.
+
Furthermore, it is possible to look at the solvent accessibility of each atom of the complete protein, which can be seen in Figure 32 and Figure 33.
   
 
{|
 
{|
|[[Image:mut485_md_solv_acc_atomic2.png|thumb|center|Figure 32: Solvent accesibility of each atom of the complete protein.]]
+
|[[Image:mut485_md_solv_acc_atomic2.png|thumb|center|Figure 32: Solvent accessibility of each atom of the complete protein.]]
|[[Image:mut485_md_solv_acc_atomic.png|thumb|center|Figure 33: Solvent accesibility of each atom of the complete protein with standard deviation.]]
+
|[[Image:mut485_md_solv_acc_atomic.png|thumb|center|Figure 33: Solvent accessibility of each atom of the complete protein with standard deviation.]]
 
|}
 
|}
   
Line 494: Line 494:
 
|}
 
|}
   
In Figure 32 the average area per atom is ploted, which deliver similar results to Figure 30. In general the atoms have not such a big area as the residues. This can be explained easily because the residue area is consisting of the single atom areas which belong to this residue.
+
In Figure 32 the average area per atom is plotted, which deliver similar results to Figure 30. In general the atoms have not such a big area as the residues. This can be explained easily because the residue area is consisting of the single atom areas which belong to this residue.
There are a huge number of atoms which have an area of about 0nm². As before, the standard deviation is not that high (Figure 33). It is a little bit higher than than the one in Figure 28 which was expected, because of the more smaller and detailed scale of this Figure. In general Figure 32 and Figure 33 confirm the results of Figure 30 and Figure 31.
+
There are a huge number of atoms which have an area of about 0nm². As before, the standard deviation is not that high (Figure 33). It is a little bit higher than than the one in Figure 28 which was expected, because of the smaller and more detailed scale of this Figure. In general Figure 32 and Figure 33 confirm the results of Figure 30 and Figure 31.
   
At the end of the plot, there are a lot of atoms which have a surface accessibility area of 0, which is consistent with the result for the residues. But at the beginning of the plot, there are no atoms which have no surface accessibility area. However, there are a lot of atoms with low or no accessibility area in the plot. Gromacs is a non-deterministic algorithm and that is why this result should be consistent with the results for the different residues.
+
At the end of the plot, there are a lot of atoms which have a surface accessibility area of 0, which is consistent with the result for the residues. But at the beginning of the plot, there are no atoms which have no surface accessibility area. However, there are a lot of atoms with low or no accessibility area in the plot.
   
  +
Figure 34 shows how much of the area of the protein is accessible to the surface during the complete simulation. As we saw before, by the gyration radius of the protein, the values differ during the simulation, which shows, that the protein is flexible.
 
Figure 34 shows how much of the area of the protein is accesibile to the surface during the complete simulation. As we saw before, by the gyration radius of the protein, the values differ during the simulation, which shows, that the protein is flexible.
 
   
 
{|
 
{|
|[[Image:mut485_md_solv_acc_surf2.png|thumb|center|Figure 34: Area of the protein which is accesible to the surface during the simulation.]]
+
|[[Image:mut485_md_solv_acc_surf2.png|thumb|center|Figure 34: Area of the protein which is accessible to the surface during the simulation.]]
|[[Image:mut485_md_solv_acc_surf.png|thumb|center|Figure 35: Area of the protein which is accesible to the surface during the simulation with standard deviation.]]
+
|[[Image:mut485_md_solv_acc_surf.png|thumb|center|Figure 35: Area of the protein which is accessible to the surface during the simulation with standard deviation.]]
 
|}
 
|}
   
Line 519: Line 518:
 
|}
 
|}
   
Figure 34 and Figure 35 display the solvent accessibility surface of the whole protein during the simulation. The surface accessibility of the hydrophobic residues has an area of about 135nm², which is relatively consistent during the complete simulation. The second plot describes the solvent accesibility for different physiocochemical properties. It shows that the are of the hydrophobic amino acids is larger than the are of the hydrophilic amino acids which is unexpected. Normally, hydrophobic amino acids prefer a location in the core of the protein and not on the surface.
+
Figure 34 and Figure 35 display the solvent accessibility surface of the whole protein during the simulation. The surface accessibility of the hydrophobic residues has an area of about 135nm², which is relatively consistent during the complete simulation. The second plot describes the solvent accessibility for different physicochemical properties. It shows that the accessibility rate of the hydrophobic amino acids is larger than of the hydrophilic amino acids which is unexpected. Normally, hydrophobic amino acids prefer a location in the core of the protein and not on the surface.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 526: Line 525:
 
=== hydrogen-bonds ===
 
=== hydrogen-bonds ===
   
As a next step we analysis the formed hydrogen bonds within the protein during the simulation. Here, we differ between hydrogen-bonds between the protein itselfs and bonds between the protein and the water.
+
As a next step we analysis the formed hydrogen bonds within the protein during the simulation. Here, we differ between hydrogen-bonds between the protein itself and bonds between the protein and the water.
   
 
The following plots display the number of hydrogen bonds within the protein over the simulation time.
 
The following plots display the number of hydrogen bonds within the protein over the simulation time.
Line 554: Line 553:
 
|}
 
|}
   
In Figure 36 you can see the bonds within the protein. Here the number differs between 300 bonds and 355. Most of the time, the protein has between 320 and 330 hydrongen-bonds. Furthermor, it is possible to see in this plot, that the protein is flexible, because the number of bonds fluctuate extremely over the time.
+
In Figure 36 you can see the bonds within the protein. Here the number differs between 300 bonds and 355. Most of the time, the protein has between 320 and 330 hydrogen-bonds. Furthermore, it is possible to see in this plot, that the protein is flexible, because the number of bonds fluctuate extremely over the time.
   
Figure 37 displays the number of hydrogen bonds that occure during the simulation as well as all residue pairs with a distance smaller than 0.35nm which is the distance where a hydrogen bond is theoretically possible. This plot shows that there exist much more possible hydrogen bindings than occurred in real. Here the number of possible pairs is about 1500 whereas the number of formed hydrogen bond is only between 320 and 330 which is only about 20%. The small number of formed hydrogen bonds can indicate the high protein's flexibility.
+
Figure 37 displays the number of hydrogen bonds that occur during the simulation as well as all residue pairs with a distance smaller than 0.35nm which is the distance where a hydrogen bond is theoretically possible. This plot shows that there exist much more possible hydrogen bindings than occurred in real. Here the number of possible pairs is about 1500 whereas the number of formed hydrogen bond is only between 320 and 330 which is only about 20%. The small number of formed hydrogen bonds can indicate the high protein's flexibility.
   
 
The following plots display the number of hydrogen bonds between the protein and the surrounding water over the simulation time.
 
The following plots display the number of hydrogen bonds between the protein and the surrounding water over the simulation time.
Line 586: Line 585:
 
Looking at the number of hydrogen bonds formed between the protein and the surrounding water, which is visualized in Figure 38, we can see that there exist much more bonds between protein and water than within the protein. The number differs between 800 and 900 which is about 3 times more than the number within the protein. Most of the time, the protein forms between 840 and 860 bonds with the surrounding water.
 
Looking at the number of hydrogen bonds formed between the protein and the surrounding water, which is visualized in Figure 38, we can see that there exist much more bonds between protein and water than within the protein. The number differs between 800 and 900 which is about 3 times more than the number within the protein. Most of the time, the protein forms between 840 and 860 bonds with the surrounding water.
   
Figure 39 displays additional the number of residue pairs with a distance less than 0.35 nm which is the distance where a hydrogen bond is theoretically possible. The number of pairs within 0.35nm is about 1000. Compared to Figure 34 the distance of possible and real occurring hydrogen bonds is significantly lower. In this case it almost 80% of all possible hydrogen bonds are also real hydrogen bonds. Therefore, we can see that the binding between protein and water is really stable.
+
Figure 39 displays additional the number of residue pairs with a distance less than 0.35 nm which is the distance where a hydrogen bond is theoretically possible. The number of pairs within 0.35nm is about 1000. Compared to Figure 34 the distance of possible and real occurring hydrogen bonds is significantly lower. In this case, almost 80% of all possible hydrogen bonds are also real hydrogen bonds. Therefore, we can see that the binding between protein and water is really stable.
   
 
This is no surprise, because every residue on the surface has contact with water, whereas within the protein there are a lot of amino acids which have no contact partners, because of the big underlying distance to another amino acid.
 
This is no surprise, because every residue on the surface has contact with water, whereas within the protein there are a lot of amino acids which have no contact partners, because of the big underlying distance to another amino acid.
Line 595: Line 594:
 
=== Ramachandran plot ===
 
=== Ramachandran plot ===
   
Now, we want to have a closer look to the secondary structure of the protein during the simulation. Therefore, we used a Ramachandran plot to analyse the phi and psi torsion angles of the backbone to get a better understanding of the secondary structure during the simulation.
+
Now, we want to have a closer look to the secondary structure of the protein during the simulation. Therefore, we used a Ramachandran plot to analyze the phi and psi torsion angles of the backbone to get a better understanding of the secondary structure during the simulation.
   
 
[[Image:mut485_ramachandran.png|thumb|center|Figure 40: Ramachandran Plot of the Mutation 485.]]
 
[[Image:mut485_ramachandran.png|thumb|center|Figure 40: Ramachandran Plot of the Mutation 485.]]
   
As we can see on Figure 40, there are a lot of beta sheets, alpha helices and right-handed alpha helices. The white regions are the regions where no secondary structure can be found, which is right.
+
As we can see on Figure 40, there are a lot of beta sheets, alpha helices and right-handed alpha helices. The white regions are the regions where no secondary structure can be found. The white regions of our ramachandran plot agree with the white regions of a standard ramachandran plot.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 606: Line 605:
 
=== RMSD matrix ===
 
=== RMSD matrix ===
   
Next we analysed the RMSD values. Therefore, we used a RMSD matrix. This is useful to see if there are groups of structures over the simulation that share a common structure. These groups will have lower RMSD values withing their group and higher RMSD values compared to structure which are not in the group.
+
Next we analyzed the RMSD values. Therefore, we used a RMSD matrix. This is useful to see if there are groups of structures over the simulation that share a common structure. These groups will have lower RMSD values withing their group and higher RMSD values compared to structure which are not in the group.
   
 
The following matrix shows the RMSD values of our structures.
 
The following matrix shows the RMSD values of our structures.
Line 613: Line 612:
   
   
As you can see in Figure 41, there is one big green group which is colored in green at the right top. Furthermore in this group there are some light blue regions which indicate reagions with higher density. This shows that there are some structures in the simulations which stay more rigid. Besides the rest of the matrix displays no regions with outstanding high density. This means that there exist dissimilar structure during the simulation as well which is probably caused by the moving of the protein.
+
As you can see in Figure 41, there is one big group which is colored in green at the right top. Furthermore in this group there are some light blue regions which indicate regions with higher density. This shows that there are some structures in the simulations which stay more rigid. Besides, the rest of the matrix displays no regions with outstanding high density. This means that there exist dissimilar structure during the simulation, which is probably caused by the moving of the protein.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
Line 624: Line 623:
 
We visualized all of these cluster structures in Figure 42:
 
We visualized all of these cluster structures in Figure 42:
   
[[Image:mut485_clusters.png|thumb|center|Figure 42: Visualisation of the different clusters]]
+
[[Image:mut485_clusters.png|thumb|center|Figure 42: Visualization of the different clusters]]
   
 
Next we aligned some structures of the cluster and measured the RMSD:
 
Next we aligned some structures of the cluster and measured the RMSD:
Line 656: Line 655:
 
=== internal RMSD ===
 
=== internal RMSD ===
   
The last point in our analysis is the calculation of the internal RMSD values. The internal RMSD describes the distances between the single atoms within protein, which helps to obtain the structure of the protein.
+
The last point in our analysis is the calculation of the internal RMSD values. The internal RMSD describes the distances between the single atoms within the protein, which helps to obtain the structure of the protein.
   
 
[[Image:mut485_md_internal_rms.png|thumb|center|Figure 44: Plot of the distance RMS values in the protein.]]
 
[[Image:mut485_md_internal_rms.png|thumb|center|Figure 44: Plot of the distance RMS values in the protein.]]
Line 673: Line 672:
 
|}
 
|}
   
Figure 44 shows that the RMSD increases consistent during the whole simulation. At the beginning the RMSD is relatively small and then arises very fast till it reaches some kind of stagnation where it rises very slow. There exist some vallies in the plot at different time points. However, tt looks similar to the curve of the natural logarithmus. The internal RMSD reaches at the end about 0.25 Angstorm, which is not relatively high. Therefore the protein has a big distances to itself.
+
Figure 44 shows that the RMSD increases consistent during the whole simulation. At the beginning the RMSD is relatively small and then arises very fast till it reaches some kind of stagnation where it rises very slow. There exist some valleys in the plot at different time points. However, it looks similar to the curve of the natural logarithms. The internal RMSD reaches at the end about 0.25 Angstrom, which is not relatively high. Therefore the protein has a big distances to itself.
   
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].
 
Back to [[http://i12r-studfilesrv.informatik.tu-muenchen.de/wiki/index.php/Tay-Sachs_Disease Tay-Sachs Disease]].

Latest revision as of 13:03, 29 September 2011

check the trajectory

We checked the trajectory and got following results:

Reading frame       0 time    0.000   
# Atoms  96545
Precision 0.001 (nm)
Last frame       2000 time 10000.000 

Furthermore, we got some detailed results about the different items during the simulation.

Item #frames Timestep (ps)
Step 2001 5
Time 2001 5
Lambda 0 -
Coordinates 2001 5
Velocities 0 -
Forces 0 -
Box 2001 5

The simulation finished on node 0 Thu September 15 19:12:47 2011.

Time
Node (s) Real (s) %
22336.000 22336.000 100%
6h12:00

The complete simulation needs 6 hours and 12 minutes runtime.

Performance
Mnbf/s GFlops ns/day hour/ns
1277.617 93.808 38.682 0.620

As you can see in the table above, it takes about 2/3 hour to simulate 1 nano second (ns) of the system. So therefore, it would be possible to simulate about 37 ns in one complete day calculation time.

Back to [Tay-Sachs Disease].

Visualize in PyMol

First of all, we visualized the simulation with ngmx, because it draws bonds based on the topology file. ngmx gave the user the possibility to choose different parameters. Therefore, we decided to visualize the system with following parameters:

Group 1 Group 2
System Water
Protein Ion
Backbone NA
MainChain+H CL
SideChain

Figure 1 shows the visualization with ngmx:

Figure 1: Visualization of the MD simulation for mutation 436 with ngmx

Furthermore, we also want to visualize the structure with PyMol, which can be seen on Figure 2.

Figure 2: Visualization of the MD simulation for mutation 485 with PyMol

Back to [Tay-Sachs Disease].

Create a movie

Next, we want to visualize the protein with PyMol. Therefore, we extracted 1000 frames from the trajectory, leaving out the water and jump over the boundaries to make continuous trajectories.

The program asks for a group as output. We only want to see the protein, therefore we decided to choose group 1.

Here you can see the movie in stick line and cartoon modus.

Figure 3: Movie of the motion of mutation 485 in stick view.
Figure 4: Movie of the motion of mutation 485 in cartoon view

On Figure 3 and Figure 4, we can see that motion of the protein over time, which was created by the MD simulation.

Back to [Tay-Sachs Disease].

energy calculations for pressure, temperature, potential and total energy

Pressure

Average (in bar) 0.998385
Error Estimation 0.0058
RMSD 71.0317
Tot-Drift -0.0436306
Minimum (in bar) -230.0158
Maximum (in bar) 243.7419

The plot with the pressure distribution of the system can be seen here:

Figure 5: Plot of the pressure distribution of the MD system.

As you can see in Figure 5, the pressure fluctuates in the system around 0 and the amplitude does mostly not exceed 100. Contrary,there are some outliers which reach values of almost 250 and -250 bar. In this cases we are not sure, if a protein works under such a high pressure.

Back to [Tay-Sachs Disease].

Temperature

Average (in K) 297.936
Error Estimation 0.0045
RMSD 0.940566
Tot-Drift 0.00654126
Minimum (in K) 294.99
Maximum (in K) 301.08

The plot with the temperature distribution of the system can be seen here:

Figure 6: Plot of the temperature distribution of the MD system.

Figure 6 displays the distribution of the temperature in the current MD system. In this case the temperature fluctuates around 298K. The maximal occurring amplitude between the average and the outliers temperature is only about 4 K which is not much. But we have to keep in mind, that only some degree difference can affect huge functional loss of a protein. 298 K corresponds to 25°C, which is relatively low for human protein activity, because the highest activity is normally reached at body temperature which is about 36°C.

Back to [Tay-Sachs Disease].

Potential

Average (in kJ/mol) -1.28176e+06
Error Estimation 85
RMSD 1068.67
Tot-Drift -536.314
Minimum (in kJ/mol) -1.28513e+06
Maximum (in kJ/mol) -1.27769e+06

The plot with the potential energy distribution of the system can be seen here:

Figure 7: Plot of the potential energy distribution of the MD system.

Figure 7 displays the potential energy of the system which is between -1.28513e+06 and -1.27769e+06. This is a relatively low energy. Therefore, this probably means that the protein is stable. Furthermore, we can suggest, that the protein with such a low energy is stable and able to function. Therefore, our simulation is probably true. Otherwise, if the energy of the simulated system would be too high, we can not trust the results, because the protein is too instable to work.

Back to [Tay-Sachs Disease].

Total energy

Average (in kJ/mol) -1.05203e+06
Error Estimation 83
RMSD 1308.04
Tot-Drift -531.275
Minimum (in kJ/mol) -1.05687e+06
Maximum (in kJ/mol) -1.04680e+06

The plot with the total energy distribution of the system can be seen here:

Figure 8: Plot of the total energy distribution of the MD system.

Looking at Figure 8, we can see that the total energy deviates a little from the potential energy which is minimal lower. In this case, the total energy is between -1.055e+06 and -1.045e+06. These values lie already in a range, where we can suggest that the protein energy is sufficient low so that this one can work.

Back to [Tay-Sachs Disease].

minimum distance between periodic boundary cells

Next we try to calculate the minimum distance between periodic boundary cells. As before, the program asks for one group to use for the calculation and we decided to use only the protein, because the calculation needs a lot of time and the whole system is significant bigger than only the protein. So therefore, we used group 1.

Here you can see the result of this analysis:

Figure 9: Plot of the minimum distance between periodic boundary cells.


Average (in nm) 3.215
Minimum 1.772
Maximum 4.217

Figure 9 displays the minimum distance between periodic boundary cells at different time steps. It can be seen that there are huge differences between the distances at different times. The highest distance is 4.217 nm, whereas the smallest distance is only 1.772 nm. This means that there are some states during the simulation in which the interacting atoms are close together. Contrary, there are some states in which the atoms who interact are far away. Because of the huge bandwidth of minimum distance we can conclude, that the protein is flexible.

Back to [Tay-Sachs Disease].

RMSF for protein and C-alpha

Protein

First of all, we calculate the RMSF for the whole protein.

The analysis produce two different pdb files, one file with the average structure of the protein and one file with high B-Factor values, which means that the high flexible regions of the protein are not in accordance with the original PDB file.

To compare the structure we align them with PyMol to the original structure.

original & average original & B-Factors average & B-Factors
Perspective one
Figure 10: Alignment of the original structure (green) and the calculated average structure (turquoise)
Figure 11: Alignment of the original structure (green) and the calculated structure with high B-Factor values (turquoise)
Figure 12: Alignment of the structure with high B-Factor values (red) and the calculated average structure (blue)
Perspective two
Figure 13: Alignment of the original structure (green) and the calculated average structure (turquoise)
Figure 14: Alignment of the original structure (green) and the calculated structure with high B-Factor values (turquoise)
Figure 15: Alignment of the structure with high B-Factor values (red) and the calculated average structure (blue)
RMSD
1.519 0.349 1.727

The RMSD as well as the structure alignment visualization indicates which structures are similar. In this case, the small RMSD at 0.349 as well as the structure alignment where the structures mostly agree indicates that the high B-factors agrees mostly with the original structure (Figure 11 and 14). The alignment of the original structure and the average structure delivers a higher disagreement (Figure 10 and Figure 13). There, the RMSD with 1.519 is much higher and the structure alignment is not extremely worse than the other one. The regions with high B-Factors are usually very flexible. This means that the downloaded PDB structure is probably in another state, because of its flexible regions. The low RMSD and the agreeing structure alignment of the high B-factor structure and the original one displays that the quality of predicted structure is quite good.

Furthermore, we got a plot of the RMSF values of the protein, which can be seen in Figure 13:

Figure 16: Plot of the RMSF values over the whole protein.

There are two regions with very high RMSF values. The first one is at position 150 (Figure 17), and the second one is at position 350 (Figure 18). The structure alignment of the average structure and the original one shows that the most regions match with some exceptions. Therefore, we want to analysis, if these bad-matching regions are the regions with very high B-factor values. The following picture show the two regions around position 150 and 350 which have an arose RMSF.

Figure 17: Part of the alignment between the original structure and the average structure between residue 140 and 160.
Figure 18: Part of the alignment between the original structure and the average structure between residue 340 and 360.

Furthermore, we visualized the B-factors with the PyMol selection B-factor method at these two regions. We calculated the B-factors for the blue protein (Figure 19 and Figure 20). If you see red, this part of the protein is very flexible. The brighter the color, the higher is the flexibility of this residue.

Figure 19: Part of the alignment between the original structure and the average structure between residue 140 and 160. High B-Factor value -> bright color
Figure 20: Part of the alignment between the original structure and the average structure between residue 340 and 360. High B-Factor value -> bright color

The first picture displays the alignment around region 150. Here, we can see that the loop is colored in yellow and red. This bright colors show that the B-factor at this position is very high which indicates a higher flexibility. Contrary, the second picture for the region around residue 350 show only a small part in yellow and some parts in turquoise whereas the rest is colored in dark blue. Furthermore, the second peak is about 0.35 which does not stand for a high flexibility. All in all, this detailed views assume that there is only one region in the protein with a high flexibility.

As you can see at the pictures above, especially at the first picture, which is the part with the highest peak in the plot, the structures have a very different position and the alignment in this part of the protein is very bad, although the rest of the alignment is quite good. That is also the reason for the relatively high RMSD which is caused by different position of the flexible parts of the protein.

Back to [Tay-Sachs Disease].

C-alpha

Now we repeat the analysis, done for the protein, for the C-alpha atoms of the protein. Therefore, we followed the same steps as in the section above.

To compare the structure we align them with PyMol with the original structure.

original & average original & B-Factors average & B-Factors
Perspective one
Figure 21: Alignment of the original structure (green) and the calculated average structure of the c-alpha atoms (turquoise)
Figure 22: Alignment of the original structure (green) and the calculated structure with high B-Factor values of the c-alpha atoms (turquoise)
Figure 23: Alignment of the structure with high B-Factor values of the c-alpha atoms (red) and the calculated average structure of the c-alpha atoms (blue)
Perspective two
Figure 24: Alignment of the original structure (green) and the calculated average structure of the c-alpha atoms (turquoise)
Figure 25: Alignment of the original structure (green) and the calculated structure with high B-Factor values of the c-alpha atoms (turquoise)
Figure 26: Alignment of the structure with high B-Factor values of the c-alpha atoms (red) and the calculated average structure of the c-alpha atoms (blue)
RMSD
1.258 0.283 1.297

As in the section above, the RMSD between the structure with high B-factor values and the original structure is the most similar (Figure 22 and Figure 25). This was expected, because we used twice the same model, but in this case we neglected the residues of the atoms whereas the backbone of the protein remains the same. The other two models (Figure 21, Figure 23, Figure 24 and Figure 26) have nearly the same RMSD value and therefore there are equally.

Furthermore, we got a plot of the RMSF values of the protein, which can be seen on Figure 24:

Figure 27: Distribution of the b-factor values by only regarding the backbone of the protein.

In this case, there is only one high peak at position 150 (Figure 27). Having a closer look at the protein it can be seen that the position of the beta sheets differ extremely between the two models. The other peak at position 350 could not be found in the plot. Looking at the pictures above, we can see that the backbones of the two different models not differ extremely. This means that the position of the residues differ a lot, which is not important for us, because we do not regard side chains.

Radius of gyration

Next, we want to analyze the Radius of gyration. Therefore we use g_gyrate and use only the protein for the calculation.

Figure 28: Plot with the distribution of the radius of gyration over time
Figure 29: Plot with the distribution of the radius of gyration over time for each axis
Rg (in nm) RgX (in nm) RgY (in nm) RgZ (in nm)
Average 2.416 2.145 1.630 2.094
Minimum 2.347 1.992 1.444 1.809
Maximum 2.449 2.212 1.927 2.219

Figure 28 shows the radius of gyration over the simulation time. The radius of gyration is the RMS distance from the outer parts of the protein to the protein center or gyration axis. The plot displays that the average radius is about 2.42 with some fluctuation. This indicates that the protein is flexible. Furthermore, the fluctuation is a periodic curve which shows the loss and the gain of space the protein needs. This suggest that the protein pulsates.

If we have a further look at the radius of the different axis (Figure 29), we can see, that the radius of the x coordinates is the only consistent one at about 2nm during the simulation. The radius of the z axis shows deflection at the end of the simulation where it decreases. The y axis values, however, increase during the simulation and reaches the value of the decreased z-radius which is still smaller than the radius for the x-axis. This means that the motions in x and the motion in z at the beginning of the simulation has most influence on the whole gyration radius.

Back to [Tay-Sachs Disease].

solvent accessible surface area

Next, we analyzed the solvent accessible surface area of the protein, which is the area of the protein which has contacts with the surrounding environment, mainly water.

First of all, we have a look at the solvent accessibility of each residue, which can be seen on Figure 27. Furthermore, we regard at the solvent accessibility area of each residue in the protein with standard deviation (Figure 28).

Figure 30: Solvent accessibility area of each residue in the protein
Figure 31: Solvent accessibility area of each residue in the protein with standard deviation

The following table list the average, minimum and maximum values of the solvent accessibility for each residue in the protein. The residues at the beginning and at the end of the simulation which have a value of 0 are ignored.

Average (in nm²) 0.542
Minimum (in nm²) 0.007
Maximum (in nm²) 2.014

The average area per residue during the trajectory is between 0 and 2nm², as can be seen in Figure 30. Most of the residues have an area about 0.5nm². From this it follows that there are mainly sparse moving residues during the complete simulation with some exceptions where the residues are very flexible. In Figure 31, you can additionally see the standard deviation, which is very low and which indicates that there are no big outliers in there. This means that there is no big deviation from the average area so the residues behave in the same way during the trajectory.

Besides, we can analyze the position of the residues within the protein based on the solvent accessibility. First, we can see in Figure 30 that the first 100 and the last 100 residues have an average solvent accessibility of 0 which means that these residues are always completely in the interior of the protein. Most of the residues have a solvent accessibility about 0.5nm², and there are only some outliers with an accessibility of more than 1.5nm². This means that there are some residues which are almost always on the surface, a lot of residues which are partly or temporarily on the surface and a lot of residues which are never on the surface. Looking at Figure 31, we can see that the standard deviation is relatively low. This means that there are no system states in which any residues with low or no solvent accessibility get complete accessible to the surface. If the standard deviation would be very high, it would indicate that there are some very unusual states in the simulation which is not the case in our simulation.

Furthermore, it is possible to look at the solvent accessibility of each atom of the complete protein, which can be seen in Figure 32 and Figure 33.

Figure 32: Solvent accessibility of each atom of the complete protein.
Figure 33: Solvent accessibility of each atom of the complete protein with standard deviation.

As before, we only regard the atoms with an area of more than 0 in the following table.

Average (in nm²) 0.032
Minimum (in nm²) 0
Maximum (in nm²) 0.561

In Figure 32 the average area per atom is plotted, which deliver similar results to Figure 30. In general the atoms have not such a big area as the residues. This can be explained easily because the residue area is consisting of the single atom areas which belong to this residue. There are a huge number of atoms which have an area of about 0nm². As before, the standard deviation is not that high (Figure 33). It is a little bit higher than than the one in Figure 28 which was expected, because of the smaller and more detailed scale of this Figure. In general Figure 32 and Figure 33 confirm the results of Figure 30 and Figure 31.

At the end of the plot, there are a lot of atoms which have a surface accessibility area of 0, which is consistent with the result for the residues. But at the beginning of the plot, there are no atoms which have no surface accessibility area. However, there are a lot of atoms with low or no accessibility area in the plot.

Figure 34 shows how much of the area of the protein is accessible to the surface during the complete simulation. As we saw before, by the gyration radius of the protein, the values differ during the simulation, which shows, that the protein is flexible.

Figure 34: Area of the protein which is accessible to the surface during the simulation.
Figure 35: Area of the protein which is accessible to the surface during the simulation with standard deviation.
Average (in nm²) 135.452
Minimum (in nm²) 129.167
Maximum (in nm²) 142.977

Figure 34 and Figure 35 display the solvent accessibility surface of the whole protein during the simulation. The surface accessibility of the hydrophobic residues has an area of about 135nm², which is relatively consistent during the complete simulation. The second plot describes the solvent accessibility for different physicochemical properties. It shows that the accessibility rate of the hydrophobic amino acids is larger than of the hydrophilic amino acids which is unexpected. Normally, hydrophobic amino acids prefer a location in the core of the protein and not on the surface.

Back to [Tay-Sachs Disease].

hydrogen-bonds

As a next step we analysis the formed hydrogen bonds within the protein during the simulation. Here, we differ between hydrogen-bonds between the protein itself and bonds between the protein and the water.

The following plots display the number of hydrogen bonds within the protein over the simulation time.

Figure 36: Number of hydrogen-bonds in the protein over simulation time
Figure 37: Number of hydrogen-bonds and the possible hydrogen-bonds in the protein over simulation time
bonds in the protein possible bonds in the protein
Average 323.337 1543.024
Minimum 300 1491
Maximum 354 1602

In Figure 36 you can see the bonds within the protein. Here the number differs between 300 bonds and 355. Most of the time, the protein has between 320 and 330 hydrogen-bonds. Furthermore, it is possible to see in this plot, that the protein is flexible, because the number of bonds fluctuate extremely over the time.

Figure 37 displays the number of hydrogen bonds that occur during the simulation as well as all residue pairs with a distance smaller than 0.35nm which is the distance where a hydrogen bond is theoretically possible. This plot shows that there exist much more possible hydrogen bindings than occurred in real. Here the number of possible pairs is about 1500 whereas the number of formed hydrogen bond is only between 320 and 330 which is only about 20%. The small number of formed hydrogen bonds can indicate the high protein's flexibility.

The following plots display the number of hydrogen bonds between the protein and the surrounding water over the simulation time.

Figure 38: Number of hydrogen-bonds between the protein and the surrounding water.
Figure 39: Number of hydrogen-bonds and the possible hydrogen-bonds between the protein and the surrounding water.
bonds between protein and water possible bonds between protein and water
Average 847.965 999.310
Minimum 783 882
Maximum 912 1126

Looking at the number of hydrogen bonds formed between the protein and the surrounding water, which is visualized in Figure 38, we can see that there exist much more bonds between protein and water than within the protein. The number differs between 800 and 900 which is about 3 times more than the number within the protein. Most of the time, the protein forms between 840 and 860 bonds with the surrounding water.

Figure 39 displays additional the number of residue pairs with a distance less than 0.35 nm which is the distance where a hydrogen bond is theoretically possible. The number of pairs within 0.35nm is about 1000. Compared to Figure 34 the distance of possible and real occurring hydrogen bonds is significantly lower. In this case, almost 80% of all possible hydrogen bonds are also real hydrogen bonds. Therefore, we can see that the binding between protein and water is really stable.

This is no surprise, because every residue on the surface has contact with water, whereas within the protein there are a lot of amino acids which have no contact partners, because of the big underlying distance to another amino acid.

Back to [Tay-Sachs Disease].

Ramachandran plot

Now, we want to have a closer look to the secondary structure of the protein during the simulation. Therefore, we used a Ramachandran plot to analyze the phi and psi torsion angles of the backbone to get a better understanding of the secondary structure during the simulation.

Figure 40: Ramachandran Plot of the Mutation 485.

As we can see on Figure 40, there are a lot of beta sheets, alpha helices and right-handed alpha helices. The white regions are the regions where no secondary structure can be found. The white regions of our ramachandran plot agree with the white regions of a standard ramachandran plot.

Back to [Tay-Sachs Disease].

RMSD matrix

Next we analyzed the RMSD values. Therefore, we used a RMSD matrix. This is useful to see if there are groups of structures over the simulation that share a common structure. These groups will have lower RMSD values withing their group and higher RMSD values compared to structure which are not in the group.

The following matrix shows the RMSD values of our structures.

Figure 41: RMSD matrix of our structures during the simulation


As you can see in Figure 41, there is one big group which is colored in green at the right top. Furthermore in this group there are some light blue regions which indicate regions with higher density. This shows that there are some structures in the simulations which stay more rigid. Besides, the rest of the matrix displays no regions with outstanding high density. This means that there exist dissimilar structure during the simulation, which is probably caused by the moving of the protein.

Back to [Tay-Sachs Disease].

cluster analysis

Next, we started a cluster analysis. First of all, we found 225 different clusters.

We visualized all of these cluster structures in Figure 42:

Figure 42: Visualization of the different clusters

Next we aligned some structures of the cluster and measured the RMSD:

Cluster 1 Cluster 2 RMSD
cluster 1 cluster 2 0.790
cluster 1 cluster 5 0.755

The RMSD values of the different structures are very similar, which is displayed in the picture above. Furthermore, the RMSD values of the different structures of the clusters are very low. This indicates that the different structures of the simulation agree mostly.

To have a better insight into the distribution of the RMSD value between the different clusters, we visualize the distribution in Figure 43.

Figure 43: Distribution of the RMSD value over the different clusters

Figure 43 displays the distribution of the RMSD. The highest peak is at about 0.16 Angstrom. This means, that most of the structures have a RMSD about 0.16 Angstrom compared to the start structure. This value is not that high, but it is a strong hint, that the protein is flexible during the simulation.

Back to [Tay-Sachs Disease].

internal RMSD

The last point in our analysis is the calculation of the internal RMSD values. The internal RMSD describes the distances between the single atoms within the protein, which helps to obtain the structure of the protein.

Figure 44: Plot of the distance RMS values in the protein.


Average (RMSD in nm) 0.243
Minimum (RMSD in nm) 4.906e-07
Maximum (RMSD in nm) 0.289

Figure 44 shows that the RMSD increases consistent during the whole simulation. At the beginning the RMSD is relatively small and then arises very fast till it reaches some kind of stagnation where it rises very slow. There exist some valleys in the plot at different time points. However, it looks similar to the curve of the natural logarithms. The internal RMSD reaches at the end about 0.25 Angstrom, which is not relatively high. Therefore the protein has a big distances to itself.

Back to [Tay-Sachs Disease].